Chromatography Tubing
Optimize Technologies 1/16" OD x .040" ID x 10ft PEEK Tubing
Optimize's PEEK tubing is biocompatible and chemically inert to most commonly-used solvents and can withstand pressures up to 6,000 psi. It remains a great alternative to stainless steel tubing for high pressure applications, withstands continuous use at HPLC pressure without swelling or bursting, its not affected by aggressive mobile phases and will not corrode. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Waters Corporation Tubing Assembly, Inject Out to HPLC Column, 0.005 x 11 in. long, HPLC fitting
Waters Corp Waters Tubing, Column Outlet, PEEK, 0.0025 in
This tan-colored column outlet tubing has an inner diameter of 0.0025 in. It is designed as a spare part for various applications and is supplied as one unit per package.
- Tan-colored column outlet tubing.
- Inner diameter of 0.0025 in.
- Packaged as 1 unit per package.
- Replacement schedule is as required.
Waters Corporation Tubing, FEP, 12 mm OD, 1 m Length
This tubing is a replacement 1 m piece of FEP tubing with a 12 mm outer diameter. It is commonly used for waste drainage in Mass Spectrometers and other various laboratory locations.
- Made from FEP material
- Features a 1 m length
- Has a 12 mm outer diameter
- Suitable for waste drainage in mass spectrometers
Waters Corporation Tubing, Fused Silica Capillary, 375μm OD, 75μm ID, 10 m
Waters Corporation Tubing, Fused Silica Capillary, 375μm OD, 75μm ID, 10 m
Waters Corporation Tubing, TYGON, 3/16 in OD, 1/16 in ID, 25 in
This tubing is made from TYGON material, designed for various laboratory applications. It features precise dimensions for reliable fluid transfer and is provided in a convenient 25 in. length.
- Material: TYGON
- Outer diameter: 3/16 in.
- Inner diameter: 1/16 in.
- Length: 25 in.
Microsolv Technology Corporation Tubing, PEEK, 1/8" ID, 1/4" OD, Natural Color. 10 Meter Roll. 1 EA.
This wide outer diameter, Laboratory Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 3300 psi.
IDEX HEALTH & SCIENCE UPCHURCH TUBING 8INX0.093X50ININ TEFZEL
NC0707020 TUBING 8INX0.093X50ININ TEFZEL
Trajan Scientific VICI Tubing, Polymeric, PTFE, 1/16" OD Tubing, 0.030" ID, 100 ft
VICI Valco Tubing, Polymeric, PTFE, 1/16" OD tuing, 0.030" ID, 100 ft. Made in the USA.
Waters Corporation Tubing, ETFE, 1/8 in. OD, 0.040 in. ID
This tubing is carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility needed when setting up and maintaining a system.
- Provide leak-free connections
- Low dead volume
- Minimal band spreading
- Available in a variety of materials, lengths, and diameters
DSI LLC Tubing, PEEK, 1/16'' x 1.00 mm ID, grey striped, 10m/pkg
Tubing, PEEK, 1/16'' x 1.00 mm ID, grey striped, 10m/pkg
DSI LLC Tubing, SS, precut 1/16'' OD x 0.25 mm ID, length 200mm
Tubing, SS, precut 1/16'' OD x 0.25 mm ID, length 200mm